3D Printing Guides

When getting started in 3d printing, you will be overwhelmed with the number of parameters that your Slicer has to offer. Some of them are […]

Recycling used filament spools is an ongoing challenge for 3d hobbyists. This is mostly because not all spools are recyclable. Some spools have a recycling

During the regular and normal use of a 3D printer, there is a wide variety of problems that can appear. Some of them will just

As a newbie to 3D printing, this is the question that may have been bothering you for months. You’re always on the lookout for materials

Did you know that you can print images with your 3d printer? Yes, like a regular printer but fancier and with a three-dimensional look. These

You just got your first resin printer, installed a slicer for those types of printers, and then started printing. Now, you’re almost out of resin,

If you’ve already read a few posts related to 3D printing and dabbled a little in the details of the process, you sure are aware

Have you ever noticed some plastic hair in your print going from a wall to another? Or did you find small plastic balls on the

3D Printing definitely comes with its vast number of issues and problems you need to solve, and when you’re dealing with dual extruders it’s even

If you have been introduced to the 3D printing world fairly recently, you already know about all the most relevant slicers. You may have also